Copper alloy scrap
70/30, 65/35 and 60/40 brass, copper bar ends and brass turnings from stamping and machining shops.
1 / 6Tin‑plated and Nickel‑plated Copper Tubes
Scrap copper alloy generated from component stamping, coated with tin (Sn), nickel (Ni) or a combined Ni+Sn layer. It must be sorted by coating type to assess quality and purchase price.
- Alloy Type
- Brass
- Type
- From the stamping process, there is a tin (Sn) plating, nickel (Ni) plating, or combined Ni + Sn plating.
ZaloProduct description
Specifications
| Scrap group | Copper alloys |
|---|---|
| Alloy Type | Brass |
| Type | From the stamping process, there is a tin (Sn) plating, nickel (Ni) plating, or combined Ni + Sn plating. |
| Buying price | Not published – contact us for a quote |
Other types of scrap
- Alloy type
- Brass
- 70/30 brass
- About 70% copper (Cu) and 30% zinc (Zn)
Copper alloy (soft yellow copper, leaf brass) C2680, 2600
Brass in thin sheet, label or stamping scrap form, about 70% Cu – 30% Zn or 65% Cu – 35% Zn.
- Composition
- 60% copper (Cu) and 40% zinc (Zn)
- Form
- Sheet, labels or clippings and stampings
Copper wire (selected copper, good pieces) C3601, C3600
60% Cu – 40% Zn brass in sheet, label or clipping and stamping form, generated in production.
- Material
- Copper brass and mixed tin scrap
- Form
- Water taps, valves and water supply accessories
Copper Scrap (nickel‑plated or tin‑plated coil)
Mixed copper-brass and tin scrap, including plated, unplated, or with attached materials, mainly recovered from water taps, valves and water supply fittings. Impurities such as iron, stainless steel, plastic, etc. must not exceed 0.5%.
- Form
- Shavings, chips, twisted copper scrap from turning, milling, drilling
- Composition
- Alloy of copper (Cu) and zinc (Zn)
Brass turnings
Brass turnings, chips and curled swarf from turning, milling and drilling – the cleaner, drier and less oily, the higher the value.